The product is specially designed to automatically control the running of household water pumps. The main function of the product is to keep the household water supply system in water supply state with a constant pressure.
- If special fault occurs,such as water shortage and jamming in suction tube. The product is able to identify the fault and can stop the pump at the same time, then the red light “Failure” will flash to prevent the water pump running under water shortage.
- After the faults causing such as jamming or water shortage are eliminated, it is allowed to press “Restart” button to restart the water pump.
- The controller has the restore function after power faults and its start flux is about 30-60Ltr/ hr, which reduces the hammer effect in system pipeline. It is an ideal selection for household application
Horizontal & Vertical Pressure Kit
Pressure Range :1.2bar – 1Obar
Connection : 1•• x 1 ..
IP Protection : IP 65
Rated Current : 10A
Rated Voltage : 220-240¥
Max Power : 1.5kW – 2.0 HP
Frequency : 50/60Hz
Ambient Temp : 60°C
Start and stop the pump automatically.
Protect the pump from damage caused by dry running.
Protect the pump from damage caused by overheat.
Examine the water automatically.
Replacing the traditional process tank system.
Start and stop the water pump by turning on and off the water tap.
Maintaining constant pressure in water supply period.
Reducing influence of water attack
Automatically stopping the water pump under water shortage to protect the water pump from dry running.